Reachable at 9560662883 
011-46039993 (Ext. 21 to 32) (10am - 06pm)
You have no items in your shopping cart.
Filter BY BRANDS
Recently viewed products
Tools, Spares and Hardware
Tools, Spares and Hardware
Electrical Grinding Flex Shaft Machine-6MM, 370W, 11500 RPM
Electrical Grinding Flex Shaft Machine are frequently in heavy industries, foundries, and fabrication shops, grinding machines are frequently utilised. It is ideal for big or protracted tasks where lifting them or bringing them close to the grinding machine is not possible.
Hexagonal Head Bolt with Nut and Washer-M16x80MM
Hexagonal Head Bolt with Nut and Washer is gripped by another spanner to prevent rotation of the bolt when screwing the nut on or off of it. The thickness of the bolt-head is the only difference between its measurements and those of the hexagonal nut.
Hexagonal Head Bolt with Nut and Washer-M12x60MM
Hexagonal Head Bolt with Nut and Washer is gripped by another spanner to prevent rotation of the bolt when screwing the nut on or off of it. The thickness of the bolt-head is the only difference between its measurements and those of the hexagonal nut.
V-Pulley Belt Section-335MM, Groove 10
V-belt pulleys, also known as vee belt sheaves, are mechanisms that transfer power between axles using a mechanical coupling with a trapezoidal cross section called a v-belt. Together, these components provide a slip- and misalignment-resistant high-speed power transmission solution.
Impact Wrench-3/4 Inch Square Drive, Maximum Torque 1800NM, 40V
An impact wrench is a socket wrench power tool designed to produce high torque output with low user effort by storing energy in a rotating mass and then delivering it abruptly to the output shaft.
Bolt (Hammer Driven Pin Anchor Type)-M8, 60MM
Bolt (Hammer Driven Pin Anchor Type) are anchors with a hammer drive are used for low duty fixing. Installation is best suited for them in dry, enclosed spaces. They are not the ideal option to use outdoors or in moist environments.
Bolt (Hammer Driven Pin Anchor Type)-M16, 150MM
Bolt (Hammer Driven Pin Anchor Type) are anchors with a hammer drive are used for low duty fixing. Installation is best suited for them in dry, enclosed spaces. They are not the ideal option to use outdoors or in moist environments.
Bolt (Hammer Driven Pin Anchor Type)-M10, 75MM
Bolt (Hammer Driven Pin Anchor Type) are anchors with a hammer drive are used for low duty fixing. Installation is best suited for them in dry, enclosed spaces. They are not the ideal option to use outdoors or in moist environments.
Bolt (Hammer Driven Pin Anchor Type)-M12, 100MM
Bolt (Hammer Driven Pin Anchor Type) are anchors with a hammer drive are used for low duty fixing. Installation is best suited for them in dry, enclosed spaces. They are not the ideal option to use outdoors or in moist environments.
Hydraulic Thruster Brake (36Kg) for 200 MM Brake Drum
Hydraulic Thruster Brake is a tool used to keep stationary moving machinery at a slower speed. By using a lever/rod system, the spring applies the braking force to the shoes.
Hydraulic Coupler (Gun End)-1/8 BSP, 3 JAW
Hydraulic Coupler use used to connect and disconnect fluid lines quickly and easily. They give customers the opportunity to quickly attach and detach hydraulic lines from tools or add-ons.
Line Tester-Length:130, Tip Size:3.5X0.4
An electrical tool called a line tester is used in electrical installations to check for the existence of electricity and to determine the phase or live wire. A tiny light enclosed inside the tester's handle begins to illuminate when its metal tip makes contact with a live circuit.
Line Tester-Length:180, Tip Size:3.5X0.5
A line tester is an electrical tool used to test the presence of current and to identify phase / live wire in electrical installations. When the metal tip of the tester comes in contact with a live circuit, a small light encased inside the handle of the tool starts glowing.
Screw Driver (Isulated Flat)-Length: 6 Inch, Size:3.5X0.5MM
A manual or electric screwdriver is a tool that is used to turn screws. A standard simple screwdriver has a handle, a shaft that ends in a tip, and a handle that is used to turn the tip into the screw head.
Screw Driver (Isulated Flat)-Length: 4 Inch, Size:5X0.6MM
A manual or electric screwdriver is a tool that is used to turn screws. A standard simple screwdriver has a handle, a shaft that ends in a tip, and a handle that is used to turn the tip into the screw head.
Screw Driver (Isulated Flat)-Length: 4 Inch, Size:6X0.6MM
A manual or electric screwdriver is a tool that is used to turn screws. A standard simple screwdriver has a handle, a shaft that ends in a tip, and a handle that is used to turn the tip into the screw head.
Screw Driver (Isulated Flat)-Length: 6 Inch, Size:6X0.8MM
A manual or electric screwdriver is a tool that is used to turn screws. A standard simple screwdriver has a handle, a shaft that ends in a tip, and a handle that is used to turn the tip into the screw head.
Screw Driver (Isulated Flat)-Length: 3 Inch, Size:3X0.4MM
A manual or electric screwdriver is a tool that is used to turn screws. A standard simple screwdriver has a handle, a shaft that ends in a tip, and a handle that is used to turn the tip into the screw head.
Grease Gun (Hand Operated)-10KG
High-grade steel and PU are used to make the grease gun. It is appropriate for automobiles, trucks, yachts, and other substantial construction equipment. It is a manually operated grease pump that can be used to lubricate the grease fittings of a vehicle.
Insert for Face Milling Cutter-Dia 125MM with Lead Angle 45 Deg.
Cutting tools in milling machines include holders and milling inserts. To cut metals, etc., by rotating, cutting tooth (inserts or heads) are attached to a main unit (holder), which is then attached to a machine tool, such as a machining centre with a tool holder.
